Author Topic: Test IFC4 Reference view from Revit  (Read 320 times)

carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Test IFC4 Reference view from Revit
« on: April 29, 2017, 03:40:15 pm »
This is a collaborative effort to tests workflows with IFC4 Reference view from Revit. The IFC below was exported from revit 2017.
https://drive.google.com/open?id=0B4WQYStg3fvneW1oaHR5djJ5d1E

Social Buttons


carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Re: Test IFC4 Reference view from Revit
« Reply #1 on: April 29, 2017, 03:43:38 pm »
Results in navisworks Manage 2017 are negative. Missing ducts and ducts fittings.
« Last Edit: April 29, 2017, 03:46:22 pm by carlveillette »

carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Re: Test IFC4 Reference view from Revit
« Reply #2 on: April 29, 2017, 03:44:17 pm »
Results in navisworks Manage 2017 are negative.

An IFC2x3 from the same model.

carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Re: Test IFC4 Reference view from Revit
« Reply #3 on: April 29, 2017, 03:52:06 pm »
Results in Solibri 9.7 are negative. Unable to open.

carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Re: Test IFC4 Reference view from Revit
« Reply #4 on: April 29, 2017, 04:02:40 pm »
Results in Solibri 9.7 are negative. Unable to open.

Same model with IFC2x3.

carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Re: Test IFC4 Reference view from Revit
« Reply #5 on: April 29, 2017, 04:03:26 pm »
Results in Tekla 2016i are negative. Unable to open.

carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Re: Test IFC4 Reference view from Revit
« Reply #6 on: April 29, 2017, 04:03:55 pm »
Results in Tekla 2016i are negative. Unable to open.

Same model with IFC2x3.

carlveillette

  • CanBIM CP
  • Administrator
  • Newbie
  • *****
  • Posts: 23
  • Karma: +0/-0
    • View Profile
    • BIM Track
Re: Test IFC4 Reference view from Revit
« Reply #7 on: April 29, 2017, 04:15:23 pm »
Revit IFC4 imported in ArchiCAD 20.
« Last Edit: April 29, 2017, 04:21:15 pm by carlveillette »

stremblay

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Location: Quebec
    • View Profile
Re: Test IFC4 Reference view from Revit
« Reply #8 on: May 02, 2017, 04:20:58 pm »
Thanks Carl for this topic.
Looking forward to read comments from other IFC users and to see IFC4 evolution in the following months...