Modify Profile

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - carlveillette

Pages: [1] 2
1
Collaboration / Re: Converting Design model into fabrication models
« on: May 17, 2017, 06:13:02 pm »
My understanding is that most curtain wall manufacturers are working with solidworks. We have received IFC files from solidworks models but they are usually too heavy (LOD 400+) to be integrated in most of the BIM software used by designers even navisworks. Would have been nice to compare design intent with detailed curtain walls but no success  >:( ...

2
Collaboration / Re: Converting Design model into fabrication models
« on: May 12, 2017, 05:11:51 pm »
On the MEP side, our team works to convert design intent models in Revit to fabrication LOD400 using SysQue. The process is pretty simple. We were told a number of times by people around the Quebec area that SysQue was not working with canadian standards but after a few tweaks we proved them wrong.  ;) !

3
IFC / Re: IFC introduction
« on: April 30, 2017, 09:12:22 am »

4
IFC / Re: Test IFC4 Reference view from Revit
« on: April 29, 2017, 04:15:23 pm »
Revit IFC4 imported in ArchiCAD 20.

5
IFC / Re: Test IFC4 Reference view from Revit
« on: April 29, 2017, 04:03:55 pm »
Results in Tekla 2016i are negative. Unable to open.

Same model with IFC2x3.

6
IFC / Re: Test IFC4 Reference view from Revit
« on: April 29, 2017, 04:03:26 pm »
Results in Tekla 2016i are negative. Unable to open.

7
IFC / Re: Test IFC4 Reference view from Revit
« on: April 29, 2017, 04:02:40 pm »
Results in Solibri 9.7 are negative. Unable to open.

Same model with IFC2x3.

8
IFC / Re: Test IFC4 Reference view from Revit
« on: April 29, 2017, 03:52:06 pm »
Results in Solibri 9.7 are negative. Unable to open.

9
IFC / Re: Test IFC4 Reference view from Revit
« on: April 29, 2017, 03:44:17 pm »
Results in navisworks Manage 2017 are negative.

An IFC2x3 from the same model.

10
IFC / Re: Test IFC4 Reference view from Revit
« on: April 29, 2017, 03:43:38 pm »
Results in navisworks Manage 2017 are negative. Missing ducts and ducts fittings.

11
IFC / Test IFC4 Reference view from Revit
« on: April 29, 2017, 03:40:15 pm »
This is a collaborative effort to tests workflows with IFC4 Reference view from Revit. The IFC below was exported from revit 2017.
https://drive.google.com/open?id=0B4WQYStg3fvneW1oaHR5djJ5d1E

12
We have done some pretty interesting stuff with Markham. They now have their city in 3D in infraworks.


13
Groupe BIM Québec (en français) / Mot de bienvenue
« on: April 15, 2017, 09:46:03 pm »
Le groupe BIM du Québec est né de la volonté des principaux acteurs BIM au Québec de se retrouver dans un environnement propice aux échanges et retours d’expériences pour maintenir la courbe d'adoption de ces nouvelles pratiques.

Les membres du groupe contribuent à mieux intégrer les contraintes et spécificités du Québec, et mieux développer les opportunités de cette nouvelle pratique professionnelle. Depuis 2015, le groupe BIM du Québec est un partenaire affilié de BSC (https://www.buildingsmartcanada.ca/fr/affilies/).

N'hésitez pas à nous contacter: info@bimquebec.org
http://www.bimquebec.org/#apropos

14
Job Postings & Inquiries / BIM One Inc jobs in Montréal and Québec
« on: April 15, 2017, 09:33:31 pm »
Hi guys,

we are looking for experienced BIM specialists and BIM managers in Montréal and Québec city (speaking French fluently is required). See more information here : http://www.jobillico.com/en/employers/construction-virtuelle-et-technologie-bi.qTodXt/view-all-jobs


15
If you guys are looking for topics I'd be more than happy to swing by and say hello to my friends in Toronto! #3Dcoordination #QC #openBIM #BCF ...

Pages: [1] 2